Tools

This is a (non-comprehensive) list of tools at the Dallas Makerspace. This list will help us keep track of information about the tools, their general status (through the Area Cameras Page and the DMS Tool Status Board which is often out of date), and who donated/loaned it. Per the Dallas Makerspace Code of Conduct, all tools/resources must stay on the premises so that other members may use them.

Many of the specialized tools at Dallas Makerspace are dangerous or easily damaged if improperly used. If you are unsure how to safely operate a piece of equipment, find someone who knows how to use the equipment and ask for help.

If you are looking for a training class, keep an eye on the Dallas Makerspace Talk Forum and the DMS Events Calendar. If no class is scheduled, instigate one by asking the mailing list for any other potential students and members willing to teach the class.

TOOL PERMISSIONS: If a tool in the list below is marked as requiring a class, you must complete a class and/or get approval from the committee responsible for that equipment. You can see your list of approved tools when you sign into your "Who Am I" DMS account at this link. Each approved tool is listed as an "Assigned Group". (If it gives you an error message, you need to log in).

FEES: Check out the DMS_Additional_Fees page for ancillary fees and how to make those payments. You can use this online link to pay any fees.

3d Fabrication (Scanner/printers)

[top]

* 3D Scanner
* Filament printers
* Resin printers

3D Scanner

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	3D Scanner	Revopoint Pop1 scanner Specifications User Manual Software downloads	Powered USB			Owned by DMS

Filament Printers

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	3D printers (QTY: 6)	Polyprinter 229 (1.75mm ABS or Ninjaflex) Manufacturer's Specs User Manual	110	1A	Yes Online class	Partially Donated by Ed Koffeman and PolyPrinter
	3D Printer	Polyprinter508 Printing volume 20"w x 9"d x 9"h (1.75mm ABS or Ninjaflex) Specifications Quick Start Guide User Manual	110	1A	Yes Online class	Purchased by DMS 5/2018
	3D Printer	Rostock Max V3 (1.75mm PLA, PETG, or Nylon) Specifications User Guide	110		No Class pending	Purchased by DMS 5/2018
	Multicolor 3D Printer (QTY: 2)	Bambu Labs Multicolor X1 Carbon Printing volume 10"w x 10"d x 10"h (1.75mm filament) Product Overview User Manuals Maintenance and Troubleshooting	110	3.5A	Yes Class pending	Purchased by DMS 2023

Resin Printers

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	3D MSLA resin printer (2K)	Elegoo Mars Pro Build Volume 4.72x2.68x6.1" .047mm XY resolution @ 2560x1440 Tech Specs Manual	110		Yes Online class	Owned by DMS (2020)
	3D MSLA resin printer (4K)	Elegoo Mars 3 Build Volume 5.64x3.52x6.89" .035mm XY resolution @ 4098x2560 [1] Manufacturer's Repair instructions	110		Yes Online class	Owned by DMS (2022)
	3D MSLA resin printer (8K)	Elegoo Saturn 2 Build Volume 10.94x6.14x11.81" .0285mm XY resolution @ 7680x4320 Tech Specs Manual	110		Yes Online class	Owned by DMS (2023)
	Resin washing/ UV Curing station	Elegoo Mercury Plus Specifications Manual	110V		N	DMS Owned
	3D MSLA printer (resin)	Phrozen Sonic Mega 8K Tech Specs Manual Support	110V	2.5W	Yes Online	DMS Owned (2022)
	Resin washing/ UV Curing stations	Phrozen Wash & Cure Kit Specs Manual	110V		N	DMS Owned

Automotive

[top]

Automotive camera

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Two post Lift	6000 lb capacity Manual for nearly identical model	220		Yes Impromptu training is frequently posted on Talk Forum	Donated by Tom (TLAR)
	Vehicle Repair Information software	[ProDemand Automotive Software]			No Get2Know ProDemand	DMS Licensed
	Parts Washer	Partsmaster Torrent Serial: 072314A25	120V?	?	No	DMS Purchased
	EV Charging Station	Schneider Electric EVlink Level-2 Pedestal Electric Vehicle Charging Station	208	30A	No	Donated by NRG eVgo
	EV Charging Station	Tesla High Power Wall Connector	208	80A	No	Donated by Tesla
	Bike Repair Stand	Park Tools PCS-9	N/A	N/A	No	Donated by Walter Anderson, AF5WH
	Wheel Truing Stand	Park Tools TS-2.2 & TSB-2	N/A	N/A	No	Donated by Walter Anderson, AF5WH

Blacksmith Committee

[top]

See also Machine Shop and Metal Shop listings for complementary tools.

Picture	Tool	Manufacturer/Model	Svc Volts	Power	Class Required	Donated/Loaned by
	Induction Forge	LH-25A	208	3 Phase	Yes
	Propane Fired Forge	Maker Built		Propane	Yes, Stored offsite
	Propane Fired Forge Bring your own gas	--		Propane	Yes
	Propane Fired Forge Bring your own gas	--		Propane	Yes
	Furnace	--			Yes
	Hydraulic Press	Riverside Machine			Yes
	Chop saw with abrasive disc	Evolution Rage	110		Yes
	KMG-10 2"x72" Belt Grinder	Beaumont Metal Works	110	Single	Yes	DMS Purchased
	Bench Grinder	Queen City	110	Single	Yes
	Vacuum Dedicated vacuum with HEPA filter for metal dust	Power Smith	110	Single	No
	Anvils and other blacksmithing tools				Yes

Ceramics Committee

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Ceramic Kiln Max Cone 10	Paragon TNF23-3 kiln with Sentry 2.0 Controller 22.5"w x 22.25"d firing chamber Controller programming manual Kiln specifications	240 1ph	40A/9600W	Yes	Nathan Jones (loan)
	Ceramic Kiln 8.1 cu ft Max Cone 8	Skutt KMT-1222 kiln with touchscreen controller 28"w x 22"d firing chamber Specs Kiln manual Controller manual Instruction and maintenance videos	208 1ph	48A/9984W	Yes	DMS-owned
	Ceramic Kiln 7 cu ft Max Cone 6	Skutt KMT-1027 kiln with touchscreen controller 23"w x 27"d firing chamber Specs Kiln manual Controller manual Instruction and maintenance videos	208 1ph	48A/9984W	Yes	DMS-owned
	Slab Roller	North Star Standard Series 30" nominal capacity Operating Instructions	N/A		No	DMS-owned
	Potter's Wheel Total qty 8	Shimpo VL-Whisper (qty 1) Brent Model C (qty 3) Brent Model CXC (qty 1) Brent Manual	120	10A	Yes Ceramics 100	Shimpo loaned by Nathan Jones All others DMS-owned

Creative Arts (Crafts)

[top]

Picture	Tool	Manufacturer/Model	110/220	Other	Class Required	Donated/Loaned by
	Air Brush w/ Compressor	Various	110V	Water-based paints only	Yes	Owned by DMS
	Leather Working	Various	N/A	Various hand tools and consumables (Leather sewing machine shown in Sewing) Leather Working Group	Yes	Owned by DMS
	Matte cutter (61.5" capacity)	C-H Advantage Pro M60PRO	N/A	User Guide	No	Loaned by Tom Tansey @tlar

Digital Arts

[top]

Picture	Tool	Manufacturer/Model	110/220	Other	Class Required	Donated/Loaned by
	Heat Press	Dye_Sublimation Stahls’ MAXX20 Heat Press (16" x 20")	110V	DMS Dye Sub wiki MAXX20 User Manual	None	Owned by DMS
	Heat Press	Dye_Sublimation JTrans 8-in-1 Heat Press (11"x15")	110V	JTrans Heat Press Specs/ Attachments	None	Owned by DMS
	Multi-Function Mug Press	Dye_Sublimation JTrans Multi Functional Mug Press	110V	Mug Press Instructions	None	Owned by DMS
	Dye sublimation printer	Dye_Sublimation Sawgrass SG800 printer (11x17)	110V	DMS Dye Sub wiki Printer Manual	Dye Sub 101	Owned by DMS
	3D Vacuum Press	Dye_Sublimation 3D Vac-U-Press	110V	DMS Dye Sub wiki 3D Vac-U-Press Manual	Dye Sub 101	Owned by DMS
	Photo Impact Printer 3.1" square printable area	Roland Metaza MPX-80	110V	Specifications User Manual Manufacturer's Support website	Yes	Owned by DMS
	Desktop vinyl cutter	Silhouette Cameo 4 12" width	110V	Manual Silhouette Studio software	No	Owned by DMS
	Vinyl Cutter	US Cutter Titan 28 with VinylMaster CUT software	110V	Titan User Manual	Yes	Owned by DMS Purchased 2016
	Vinyl Cutter (29/30") Coming Soon	SummaCut D75 with WinPlot software	110V	User Manual Tech specs	Yes Not Developed	Donation 2020
	Scanner	Epson Expression 10000XL Bed 12.2" x 17.2"	110V	Manuals Specs	No	Owned by DMS

Fiber Arts

[top]

Picture	Tool	Manufacturer/Model	110/220	Other	Class Required	Donated/Loaned by
	Table Loom	Dorothy LeClerc 4H 15.75" table loom	N/A		Yes	Owned by DMS
	Floor Loom		N/A		Yes	Owned by DMS

Resin Group

[top]

Picture	Tool	Manufacturer/Model	110/220	Other	Class Required	Donated/Loaned by
	Pressure Pot	5 gallon	N/A		See Resin SIG for instruction	Owned by DMS
	Vacuum chamber and Pump	5 gallon degassing chamber / 8 CFM pump (for degassing mold rubber/resin)	110V		See Resin SIG for instruction	Owned by DMS Donated by Ryan Shill @rshill

Sewing

[top]

Picture	Tool	Manufacturer/Model	110/220	Other	Class Required	Donated/Loaned by
	Sewing machines (QTY 3)	Babylock Zest	110V	Specifications Threading Instructions Manual	Sewing 101	Owned by DMS Serial #'s (1) D18005082 (2) D18005098 (3) D18005099
	Sewing machine with computer controlled embroidery	Viking Designer SE 6" x 14" max area	110V	[TBA DMS Detailed Usage Notes] Manuals are on CreativeArts committee drive Operator Manual	Yes	Owned by DMS Serial # 24201122 Donation July 21, 2019
	Sewing Machine - Leather/Extra heavy duty walking foot	THOR GA 441	110V	Specifications including detailed threading photos Threading video	Yes	Owned by DMS serial# 17160044117
	Sewing Machine - heavy duty	Pfaff 130	110V	Manual Video of Pfaff 130 sewing leather	Yes	Owned by DMS Serial # 4921833
	Sewing Machine - Serger (overlock)	Brother 1034D Compact Overlock Sewing Machine	110V	Manual Specifications Machine Threading video	Yes	Owned by DMS

Digital Media

[top]

Workstations and Software

* Workstations
* PC Software Stack

[top]

Workstations

Name	Year	Manufacture / Model	Operating System	CPUs	RAM	GPUs	Drives	Serial	Notes	Assigned Caretaker
DMOne	2018	Corsair One Elite	Windows Server 2019 Standard	Intel i7-8700k Q4 2017 12MB cache 6 core / 12 thread @ 4.7 Ghz	32GB DDR4 2,667 MHz	Nvidia 1080 Ti 11GB	480 NVMe M.2 SSD 2TB HDD	002918145106	On Loan Kevin Patel	Kevin Patel
DM1		Various	Windows Server 2019 Standard	Intel i7-5820k Q3 2014 15MB cache 6 core / 12 thread @ 3.3 GHz	32GB	Nvidia GTX 980 4GB	1TB SSD 4TB HDD		DMS Owned	Luke Andraski
DM2		Various	Windows Server 2019 Standard	Intel i7-5820k Q3 2014 15MB 6 core / 12 thread @ 3.3GHz	16GB	Nvidia GTX 980 4GB	250GB SSD 4TB HDD		DMS Owned
DM3		Various	Windows Server 2019 Standard	Intel i5-4590 Q2 2014 6MB cache 4 core / 4 thread @3.3GHz	16GB	Nvidia GTX 980 4GB	240GB SSD 4TB HDD		DMS Owned
DM4			Windows 10 Professional						DMS Owned Laser Donation
DM5			Windows 10 Professional						DMS Owned Laser Donation
DM6			Windows 10 Professional						DMS Owned Laser Donation
DM7	2012	Dell Precision T3600	Windows 10 Professional	Xeon E5-1620 @ 3.6GHz	32GB	Radeon R9 200 series	2TB HDD	Service Tag 21Q7YV1 Code: 4458072637	Donated "Thanks Andrew!!!"
DMThinkpad	2011	Lenovo W520	Windows 10 Professional	Intel i7-2720QM Q1 2011 6 MB cache 4 core / 8 thread @ 2.2GHz	8GB	NVidia Quadro 2000M 2GB Intel HD Graphics 2000	512GB Intel SSD	R9-DZXR4	On Loan Kevin Patel	Kevin Patel
DMMacPro	2009/2010	Apple Mac Pro Mid 2012	Windows 10 Professional	Intel Dual Xeon	12GB		2TB HDD 2TB HDD 1TB HDD 1TB HDD	YM1300MWEUF	DMS Owned Computer Committee Donation
DMMac	2011	Apple Mac Mini Late 2014	macOS Mojave 10.14.6	Intel Core i5 1.5Ghz	4 GB DDR3	Intel HD Graphics 5000 1.5 GB		C07ND086G1HV	DMS Owned

PC Software Stack

[top]

Software	Closed Source	Open Source
Operating System	Windows Server 2019 Windows 10
Virtual Reality Augmented Reality	Steam Viveport Unity Unreal Engine 4
Computer Aided Design	Fusion 360 Inventor SolidWorks AutoCAD Siemens Solid Edge
3D Modeling	Maya Auto Studio Dimension	Blender
Computer Aided Manufacturing	Lightburn - Lasers Netfabb Premium - 3D Printing / Additive Manufacturing Powermill Ultimate - Subtractive Manufacturing
Photos	Photoshop Lightroom Classic Lightroom	Paint.NET Krita GIMP
Graphics	Illustrator InDesign Sketchbook	Inkscape
Artificial Intelligence Machine Learning		Tensorflow
Audio Video	Premier Pro Premier Rush GoPro Quik After Effects Character Animator AVID Nexis & Pro Tools Audition Abelton OBS Studio	VLC Audacity Handbrake
Circuit Boards	Eagle	KiCAD FreeCAD
Visuals & Interactions LEDs, 3D Projections, Live Music	Touch Designer
Programming	Visual Studio Dreamweaver XD Node.JS	Eclipse Notepad++ Python
Browsers	Internet Explorer	Chrome
Productivity	Microsoft Office Word, Excel, PowerPoint, Visio, Project, Publisher Adobe Acrobat, InCopy
Engineering	Revit
Utilities		WinDirStat 7zip Putty WinSCP Rufus

Camera, Video and Audio

* Cameras
* Video / Photo Accessories (Not Cameras)
* Audio

Cameras

[top]

Picture	Tool	Manufacturer/Model	Other	Serial Number	Donated/Loaned by
	Digital Camera	Sony A7iii 24.2 MP Mirrorless Digital Still Camera with 35mm full frame sensor	Lenses: * 85mm f1.8 * 56mm f1.6 * 20mm f1.4 * Kit lens Specifications Manuals	3420305
	Digital Camera	Sony DSC RX10/B Cybershot 20.2 MP Digital Still Camera	Product Overview Video Instruction Manual	0996099	DMS Purchase (2015)
	Digital Camera	Panasonic Lumix GX85 16MP Digital Still Camera	Basic Operating Manual Advanced Features Manual
	Digital Camera	Sony Nex3 14.6 MP Compact mirrorless digital still/video camera	Manual
	Digital Camera	Sony Nex5 14.2 MP Compact mirrorless digital still/video camera	https://www.sony.com/electronics/support/e-mount-body-nex-5-series/nex-5/manualsl	1733139
	Digital Camera	4 x GoPro Hero 8 Black	Quick Start Guide Manual	Serial #s - Color Green C3333424733913 Blue C3333424771101 Yellow C3333424893185 Orange C3333425007283	DMS Purchase 2019 Green GoPro On Loan to Johnny BlueJacket for PR Social Media Purposes
	HTC Vive Virtual Reality Kit	HTC			DMS Purchase 2017
	DJI Osmo Handheld	DJI

Video / Photo Accessories (Not Cameras)

[top]

	Light Reflector	N/A
	LENSBABY Velvet 56mm f/1.6	SONY	Unknown
	Sony FE 1.8/85mm lens	SONY	Unknown
	Studio Lighting	Linco Fluorescent Light Bank
	Studio Lighting	Linco Fluorescent Light Bank-2
	Studio Lighting	Linco Flora X Easy Softbox
	Studio Lighting	Aputure LSC 120dII

Audio

[top]

Quantity	Picture	Make	Model	Connection Type	Other
Microphones
Cables
11		XLR Cables		XLR- 3pin connector
		TRS Cables
Microphone Stands
2		Desk Mount Boom Stands
3		Floor Boom Stands
4		Desktop Tripods

Instruments

[top]

Qty	Picture	Make	Model
Keyboards
1		Alesis	QX49
1		Casio	CDP-135
1		Yamaha	PSR-290
Guitars
1		Squier	Strat
1		Starshine	Hollow-Body
Guitar Amps
1		Marshall	Amp Head
1		Vox	15W Combo
1		Behringer	BG412H

Electronics

[top]

No Electronics tools require training or certification for use. If you don't know how to use a tool, please ask someone for assistance.

* Counters
* Function Generators
* Miscellaneous
* Multi-Meters
* Oscilloscopes
* Power Supplies
* Soldering Tools

Counters

Picture	What	Manufacturer	Model	Power	Other	Donated/Loaned by
	Universal Counter/Timer	Hewlett Packard	HP 5314A	110V	Operating and Maintenance Manual	Serial Number: 2036AO4164
	Universal Counter	Hewlett Packard	HP 5315B	110V	Operation Manual	Serial Number: 2538A04008

Function Generator

Picture	What	Manufacturer	Model	Power	Other	Donated/Loaned by
	Signal Generators (2)	BK	BK 4053	110V	Function/Arbitrary Waveform Generators User Manual Programming Manual	Mouser Donation - Serial: 389j15118, 389j15131
	Function Generator (3)	Graten	ATF20B-DDS	110V	User Manual	Serial Number: AXH1412003914, AXH1603001023, AXH1602000050

Miscellaneous

Picture	What	Manufacturer	Model	Power	Other	Donated/Loaned by
	Virtual Bench	National Instruments	NIVB-8012	110V	Quick Start Guide Getting Started Information	Serial Number: 30BEB59
	CNC PCB Mill	CNC PCB Mill Sable 2013	2015?	110V	On loan. Current located in electronics room. Contact @Team_PCB_Mill on talk for status.	William Petefish
	LCR Meter	Signstek M4070			User Manual
	ESR Meter	Signstek MESR-100
	LCR meter	Der Ee	DE-5000	9v batt	User Manual	Serial: P0005262
	Decade Resistance Box	General Radio
	semiconductor tester/curve tracer	Peak Design Ltd	DCA75	1x AAA	User Manual and Computer Software	Serial: 0136838
	programmable dc load 0-120V,0-120A,750W total	BK	BK 8610	120v	Datasheet, User Man, Programming Man	Mouser Donation Serial: 437G17109
	Tube Tester	BK	BK 700	120v	User Man, Tube Chart/List	Donated by Rich Meyer in Memory of Walter Anderson
	Multichemistry Battery Workstation (Checker/Charger)	Revo	PowerLab 8 Touch, MPA-XH Multi-Port Safe Parallel Module	Input voltage: 10-48VDC, Input current: 1A to 40A, software limited	User Guide
	IR Thermometer	Fluke	572-2	2 AA batt	User Manual	Mouser Donation Serial: 25970005
	Thermal Imager	Flir	E-4	Internal batt/chrgr	User Manual	Mouser Donation Serial: 639031076

Multi-Meters

Picture	What	Manufacturer	Model	Power	Other	Donated/Loaned by
	Bench Multimeter (3)	Fluke	Fluke 8845A 5.4 digit bench meter	120V	User Manual	Mouser Donation - Serial: 3970003, 3970001, 3969011
	5 1/2 digit bench multimeter	Hewlett Packard	3468A	110V	User Manual	Serial Number:2137A17751
	Multimeter (2)	Fluke	Fluke 115 - True RMS Multimeter	9v batt	User Manual	Serial: 33520299WS, 33520300WS, (STOLEN Serial: 99360480, 96020622)
	multimeter (2)	Fluke	Fluke 114	9v batt	User Manual	Mouser Donation - Serial: 34700034ws, 34700037ws
	multimeter clamp	Fluke	Fluke 325	2x AAA batt	User Manual	Mouser Donation - Serial: 33990237ws
	multimeter clamp	Fluke	Fluke T6-1000	2x AA batt	User Manual	Mouser Donation - Serial: 42000218
	Multimeter	Triplett	9045	9v	User Manual	currently resides in Automotive
	High Voltage Probe	Fluke	80k-40	N/A	User Manual	On loan from Walter Anderson stolen replacement Mouser Donation serial 41980064

Oscilloscopes

Picture	What	Manufacturer	Model	Power	Other	Donated/Loaned by
	Oscilloscope (3)	Rigol	1054Z Digital Storage Oscilloscope	110v	Users Guide	Serial: DS1ZA170603033, DS1ZA180501620, DS1ZA180602208
	Oscilloscope (2)	BK	BK 2512	110V/battery	2 chnl 100mhz hnd hld scope User Manual	Mouser Donation - Serial: 404A16120, 404A16118
	RF Spectrum Analyzer	Siglent	SSA3021X	110V	Quick Start, User Manual, Programming Guide, Service Man, Data Sheet	Donated by Walter Anderson - Serial: SSA3XHA3160377

Power Supplies

Picture	What	Manufacturer	Model	Power	Other	Donated/Loaned by
	pwr sply (2)	BK	BK 9129B	120V	2x 0-30Vdc (0-3A), 1x 0-5Vdc (0-3A) programmable pwr sply User Manual, Programming Manual	Mouser Donation - Serial: 470d16129, 470c18129
	Multi-range programmable DC Power supply	Keithley	2260B-250-9	120V	0-250Vdc, 0-9A, 720W (total) Quick Start Guide, User Man	Mouser Donation - Serial: 1404051
	Power Supply (2)	BK	BK 1550	110V	1-36Vdc (0-3A), USB chrgng port(5Vdc @ 400mA) User Manual	Mouser Donation - Serial: 238c16108, 238c16106
	AC Power Supply	Associated Power Technologies	APT VariPlus 105	110V	variable AC pwr sply 50/60 hz, User Man	Serial 9991598 Donated by Rich Meyer
	Power Supply (3)	Sorensen	XT 15-4	110V	3x 0-15Vdc/0-4A	Donated by Dave Guill - Serial: 5679, 6790, 6198, (6196 in Vector), (24266 in Science)
	Power Supply	Sorensen	XT 20-3	110V	3x 0-20Vdc/0-3A	Donated by Dave Guill - Serial: 13668
	Power Supply	Power Designs	TP325	110V	Triple output, 0 - +30V (0-1A), 0 - -30V (0-1A), 0 - 6V (0-6A), User Manual	DMS Owned
	Power Supply	TekPower	HY3010E	110V	0-30Vdc, 0-10A pwr sply
	Power Supply	Electronic Measurements, Inc.	SCR40-20-0196-0v	110V	0-40Vdc, 0-20A, User Manual	S/N 7K-5397 Donated by Rich Meyer

Soldering Tools

Picture	What	Manufacturer	Model	Power	Other	Donated/Loaned by
	Soldering Station (3)	Hakko	FX-951	110V	User Manual	Serial: 05-9512-1600-4807
	soldering station (2)	Metcal	MX500	110V	User Manual	Mouser Donation - Serial: 005463, 005461
	soldering tweezers	Metcal	MX-Talon-01		Works w/ Metcal MX-500 soldering stations	Donated by Richard Meyer
	De-soldering Tool	Hakko	OFR-300	110V		Serial: 07 3002 1500 0617
	De-soldering Tool	Metcal	SP440	110V		Serial: SP4 00652 On loan from David Fenyes
	Hot Air Station	Aoyue	int899a+	110V	User Manual
	Hot Air Station	Aoyue	852A+++	110V	User Manual	Serial 090319787 Donated by David Fenyes
	Hot Air Station	Quik	957D	110V		Donated by Walter Anderson
	PreHeat Wrkstn	Metcal	PCT-103-11	110V		Mouser Donation Serial: 006821
	Color Video Microscope			110V		Donated by Richard Meyer - Updated by William Petefish
	trinocular stereo microscope	AmScope	SM-4TZ-144A	110V

Glass Works

Photos of the GlassWorks committee area

* Shaping including saws
* Lampworking
* Furnaces & Kilns
* General Tools

Shaping

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Band Saw	Diamond Elite - Formerly DL3000XL 10" x 12" table 5" throat depth Operation Manual Blade changing video	110V		Yes
	Wire Saw	Gryphon Diamond Wire Saw [Gryphon-Omni-2Plus+Instructions.pdf Instructions]	110V		Yes
	Ring Saw Qty 2	Taurus 3 Ring Saw 17 3/4" x 16" work area 1.5" throat height 5-3/4" blade diameter Operation Manual	110V		Yes
	Came Saw For stained glass Came only	Running Rabbit Weasel Came saw	110V		Yes
	Wet edge grinders Qty 3	Techniglass The Grinder 2 (shown) Inland Wiz Grinder (not shown) Inland Wizard Grinder (not shown)	110v		Yes

Furnaces & Kilns

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Small fusing microwaves for pendants and small items	Microwave ovens (qty 3)	120		Yes	DMS-owned
	Small glass kiln with controller	Jen-Ken Kiln	110V	20A	Yes	DMS-owned
	Glass Kiln	Delphi EZ-Pro 15-6 Kiln 15" x 6-1/2"d firing chamber Operation Manual Controller programming video	120	20A	Yes	DMS-owned
	Large glass kiln with Controller	EvenHeat Controller	240V		Yes
	Glass Kiln with Controller	Bartlett RTC 1000 Operation Manual	120V		Yes
	Small glass kiln with Controller	Ramp Master II Operation Manual			Yes
	Furnace	Barnstead Thermolyne Type 48000 7" x 5" x 10" chamber Operation Manual			Yes

Lampworking

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Annealing furnace	"Chili Pepper" glass annealing furnace	110V		Yes
	Annealing furnace	Maker Made Not yet in service	110V		Yes
	Lampworking stations Qty 5	Oxy-Propane lampworking stations Committee has O2 Users bring own propane			Yes

General Tools

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Hand tools	Various cutters, nippers, pliers, etc. for glass working			No
	Soldering irons	Various soldering irons for stained glass only	110V		No
	Drill Press	Central Machinery Drill Press	110V		No
	Molds	Numerous molds for fusing, slumping or frit			Yes

Hatchers Workshop

[top]

Picture	Tool	Manufacturer/Model	110/220	Donated/Loaned by
	** Brass Cleaning **
	Vibratory Tumbler	Hornady		Donated by Walter Anderson
	Vibratory Tumbler	Gesswein
	Media Separator	RCBS		Donated by Walter Anderson
	**Brass Prep **
	Combo Primer Pocket cleaner	RCBS		DMS owned
	Hand Primer Large & Small	Lyman		DMS owned
	Inertia puller	Quinetics		DMS owned
	Inertia bullet puller SR1750	Smartreloader		DMS owned
	** Scales & Powder Measures **
	Chargmaster 1500	RCBS		DMS owned
	Uniflow Powder Thrower W/ Large insert	RCBS		DMS owned
	Manual Powder Tricker	RCBS		DMS owned
	900 Grain powder scale	Dillon		DMS owned
	** Loading Equipment **
	Rock Chucker Single Stage Press	RCBS		DMS owned
	Shell Holders (2, 4, 10, 19)	RCBS		DMS owned
	9mm die set			DMS owned
	.45acp die partial set			DMS owned
	.308 win die Ultimate	LEE		DMS owned
	30-06 die Full Length set	RCBS		DMS owned
	.223 Rem die Full Length set	RCBS		DMS owned
	Case lube pad	RCBS		DMS owned
	Powder Funnel	RCBS		DMS owned
	** Gun Cleaning **
	Jag & Brush Set (2) (17 - 45 cal)	Tipton		DMS owned
	Nylon Cleaning Brushes (5)			DMS owned
	22 cal boresnake			DMS owned
	Rifle Cleaning Rod (2)	Tipton		DMS owned
	Pistol Cleaning Rod (4)	Tipton		DMS owned
	** Other **
	Digital Calipers	Pittsburg		DMS owned
	6, 22lr Snap caps	A-zoom		DMS owned
	5, .45auto Snap caps	A-zoom		DMS owned
	4, 12ga Snap caps	A-zoom		DMS owned
	3, .308 win Snap caps	A-zoom		DMS owned
	2, .223 rem Snap caps	A-zoom		DMS owned
	2, 7.62x39 Snap caps	A-zoom		DMS owned
	2, 9mm Snap caps	A-zoom		DMS owned

Infrastructure (Shop)

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Air Compressor	Quincy QT 7.5 HP Compressor	208 3 Phase	50A	No	Purchased Feb. 2015
	Honeywell Compressed Air Dryer System (attached to Quincy Compressor)		115/208/230VAC, 60Hz, 1 phase

Jewelry Studio/Lapidary

[top]

Jewelry Studio

[top]

* General Tools
* Hand Tools
* Forming/Shaping
* Casting/Molding
* Cleaning/Polishing

General Tools

Picture	Tool	Manufacturer/Model	110/220	Comments	Training Required	Donated/Loaned by
	Bench Vise	Wilton	N/A		N	Austin Greenfield (Loan)
	Flex Shaft	Foredom	110V			Owned by DMS
	Rotary Tool	Dremel	110V			Owned by DMS
	Electric Engraver	Dremel	110V			Owned by DMS
	Drill Press	Foredom P-DP30	110V	Operating Manual		Loaned by Joseph Lahoud
	(2) Turbo Braze Hydroflux Welder	Series - 14-1509	110V	Set-up and Usage Instructions	Y	Loaned by Joseph Lahoud
	Laser Welder	CPP Laser Star 501-4003 w/ stereo microscope	220V		Y	Donated to DMS
	Jewelry torches	Various torches for soldering/ annealing jewelry	N/A	Users must provide own gasses		Owned by DMS
	Ingot molds (3)	Various	N/A			Owned by DMS
	Inside Ring Engraver	PEPE tools 156.5	110V	Product Instructions	Y	Loaned by Joseph Lahoud
	Upright ring sizer	PEPE tools 185.0	N/A	Product Instructions	Y	Loaned by Joseph Lahoud
	Shank forming tool		N/A		Y	Loaned by Joseph Lahoud
	Ring mandrels	various	N/A			Owned by DMS
	Optical visors/magnifiers	various	N/A			Owned by DMS
	Rotary Tumbler	Chicago	110V			Owned by DMS

Hand Tools

[top]

Picture	Tool	Manufacturer/Model	110/220	Comments	Training Required	Donated/Loaned by
	Lot of measuring tools	Misc.	N/A / Battery	Calipers, Rulers, Scribes/Compasses, Wire and sheet gauges, Ring sizers, etc.	N	Owned by DMS
	Lot of hammers	Misc.	N/A.	Rawhide, ball peen, brass mallet, texturing, etc.	N	Owned by DMS
	High Quality Hammers	Pretz Maker	N/A	Distinguishing these from the other hammer lot because they are higher value than general hammers.	N	Owned by DMS
	Texturing Hammers	Misc.	N/A		N	Owned by DMS
	Lot of pliers	Misc.	N/A	Teethed and toothless, Needle nose, round nose, flat, wire cutters (dykes), Ring bending pliers, etc.	N	Owned by DMS
	Set of letter punches	???	N/A	Monospace font	N	Austin Greenfield (Loan)
	Set of letter punches	Rio Grande	N/A	Scripty font	N	Owned by DMS
	Beading trays	various	N/A			Owned by DMS

Forming/Shaping

[top]

Picture	Tool	Manufacturer/Model	110/220	Comments	Training Required	Donated/Loaned by
	Rolling Mill	Durston 80mm Combination Mini Rolling Mill (soft non-ferrous only)	N/A	Instruction Manual		Owned by DMS
	Mushroom Forming Stake	???	N/A		N	Owned by DMS
	Forming Staves with supporting hardware	Misc.	N/A		N	On loan from Sue Rogers
	Shear	RioGrande 12" guillotine-style shear Precision Brand	N/A	Use and Maintenance Guide Soft metals 18ga max Other non-ferrous 22ga max		Owned by DMS
	Disc Cutter	Swanstrom (16ga max)	N/A	Round punches 1/8" to 1-1/4" (1/8" increments). Soft (non-ferrous) metals 16 gauge max (< .051"). Usage video		Owned by DMS
	Doming / Dapping punches & block		N/A			Owned by DMS
	Teardrop Punch Set	???	N/A		N	Owned by DMS

Casting and Molding

[top]

Picture	Tool	Manufacturer/Model	110/220	Comments	Training Required	Donated/Loaned by
	Resin printer for Castable wax resin ONLY qty 2	Elegoo Mars 2 Pro Elegoo Mars 3 Pro	110V	See online training for resin and policy information Print setting recommendations	Y Online	DMS Owned
	Resin washing/ UV Curing station	Elegoo Mercury Plus	110V	Specifications Manual	N	DMS Owned
	Front-loading firebrick Kiln with programmable controller for lost wax/resin casting and enameling	Paragon W14	220V 1ph 16A 3750W	14" x 14" x 14" chamber volume Specifications Controller Instructions Wiring Diagram	Yes	Owned by DMS (2018)
	Small Kiln		120			Darcy Neal (loan)
	Small Vacuum Table Qty 2	Kaya Cast Vacuum Casting Machine plus similar machine	110V 7A	Instructions	Y
	Centrifugal Casting Machine	Romanoff Supercast J4 Lite	220V 3PH	Specs Overview video Manual for similar machine	Y	Donated 2023 / In service beginning Feb 18, 2024
	Pressurized Wax Injector	Rio Grande	110V		Online
	Wax Carving Pencil with various tips	SJK	110V
	Rubber Mold Vulcanizer	ARBE VD-101	110V 6A		Y	On loan from Amanda Miller
	RTV Mold frame (several)	3/4" x 6" 1" x 6" Stored in bottom drawer of short rolling cabinet		2-part RTV-silicone Jewelry Molding Compound available Instructions	Y Casting AD group

Cleaning and Polishing

[top]

Picture	Tool	Manufacturer/Model	110/220	Comments	Training Required	Donated/Loaned by
	Commercial Electric Steam Generator	Hoffman JEL-3	120V	Manual		On loan from Joseph Lahoud
	Polishing Buffer		110V		Online
	Vibratory pin cleaner	Stuller 47-5041	110V
	Ultrasonic cleaner	L&R Quantrex® Q90 Ultrasonic Specs Ultrasonic cleaning reference video	117V			Loaned by Joseph Lahoud

Lapidary

[top]

Picture	Tool	Manufacturer/Model	110/220	Comments	Training Required	Donated/Loaned by
	Vibratory tumbler	Diamond Pacific	110V		Y	Loaned by Johnny BluJacket
.	Rotary tumbler	.	110V		Y	.
	Trim saw	Lortone HS-1 "lapidary rough" only; i.e., no yard/found rocks.	110V		Y	Owned by DMS
	Rock/gem saw	"lapidary rough" only; i.e., no yard/found rocks.	110V		Y	Loaned by Nadira C.
	Shaper/polisher Qty 2	Diamond Pacific Genie	110V		Y	Owned by DMS

Laser

Laser Tools as listed on Source/Confluence

[top]

Laser Camera

MakerSpace Laser Committee: Documentation, guides & class materials

Allowable materials

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	130W Laser Cutter "Comet"	Thunder Laser Nova 63 Laser Cutter Working area 63” x 39.4”x 9.8”	230	16A	Yes Online class	Owned by DMS
	130W Laser Cutter Qty 2 "Donner" & "Blitzen"	Thunder Laser Nova 35 Working area 35.4“ x 23.6“ x 9" Brochure Manual	230	16A	Yes Online class	Owned by DMS
	Rotary attachment for Thunder	Thunder Laser Rotary Tool attachment Rotary Tool Instructions	N/A		Yes	Owned by DMS
	60W Laser Cutter	Epilog Fusion Pro 32 Working area 32” x 20” x 12.25" Features & Specs Manual			Yes	Owned by DMS
	Rotary attachment for Fusion	Rim-style rotary attachment Manual Demo video Mfr's video			Yes	Owned by DMS
	30W Laser Cutter	Epilog Zing 16 LaserCutter Working area 16" x 12" x 4.5" File:Zing-manual-web.pdf File:Epilog Zing Laser Materials DB.pdf	230	12A	Yes	Owned by DMS

Machine Shop

[top]

Machine Shop Camera
Machine Shop Camera2

See also Blacksmith Committee and Metal Shop listings for complementary tools.

See Post 2 in this Talk thread for more details on Machine Shop training.

Metal Machining

* Mills
* Lathes
* Micro Tools
* Saws & Shear
* Drill Presses
* Other Tools including test and inspection

Mills

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Knee Mill	Bridgeport, Series I with 2-axis DRO and X-axis power feed	220 3-phase	?	Yes Online AND Machine-side	DMS Purchase
	Knee Mill	Pasma Vertical Milling Machine, with 2-axis Newall DP-700 DRO and X-axis power feed DRO Manual	220 3-phase ?	?	Yes (Bridgeport class)	Donation
	CNC Vertical Milling Machine	HAAS VF-2 Vertical Machining Center	220 3-phase	50A	Yes plus Bridgeport as pre-req	Purchased Dec 2013
	CNC Vertical Milling Machine	HAAS VF-3 Vertical Machining Center NOT IN SERVICE YET Specs & Technical Info Installation Manual	220 3-phase	50A?	Yes plus Bridgeport as pre-req	On loan from Thomas Fagan

Lathes

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Gear Head Lathe	Clausing-Colchester 13-inch lathe	208/220V 3-phase	?	Yes Online AND Machine-side	DMS Purchase
	Gear Head Lathe with DRO	SHARK 16x40 Lathe	220V 3-phase	14.3A	Yes Online AND Machine-side	Donation
	8 x 10 CNC Lathe with DRO	Tormach 8L CNC Lathe Manual	110V	15A	Yes; plus Shark or Colchester as pre-req	Donated by Tails Hartnett

Sherline Micro Tools

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Microlathe Manual or CNC	Sherline lathe 4000; 3.5" x 8" bed Specifications Instruction Manual	120V	?	Yes	Donated by Rich Meyer
	Microlathe with DRO	Sherline lathe 4400B DRO; 3.5" x 17" bed Specifications Instruction Manual	120V	?	Yes	Purchased May 2017
	CNC controlled vertical micromill	Sherline mill 2000 (inches); travel 8.68"X x 5.00"Y Specifications Instruction Manual	120V	?	Yes	On loan from Kevin Oliver
	Vertical micromill with DRO	Sherline mill 5400A DRO; travel 8.65"X x 5.00"Y x 6.25"Z Instruction Manual	120V	?	Yes	Purchased May 2017
	Vertical micromill, manually controlled Metric handwheels	Sherline mill 5410; travel 8.65"X x 5.00"Y x 6.25"Z Specifications Instruction Manual	120V	?	Yes	Donated

Saws & Shear

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Metal-cutting bandsaw	Powermatic	?	?	No	DMS Purchased
	Cold Cut Saw (brass and mild steel only)	Kalamazoo FS-350SA Cold Cut Saw	220V	?	Yes	?
	Soft Metals Saw Alum, brass, bronze, copper 1" or greater in diameter	Evolution Power Tools RAGE 3-DB Specifications Instruction Manual	220V	?	Yes	DMS Purchased 2018
	Hand Shear (Capacity 16 ga mild steel)	Diacro Model 24 shear Operator Manual for newer, comparable model	N/A			DMS Owned

Drill Presses

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Drill Press	Clausing 20-inch Drill Press	220V	?	No	DMS Purchased
	Micro Drill Press	Cameron Model 164-D (users provide own drill bits) Specifications and Parts List Maintenance Oiling Locations	110V	?	No	DMS Purchased 2018

Other Tools

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Arbor Press	Greenerd Model 3-1/2 5 ton Specs	N/A			DMS Owned
	Pan Brake	Diacro Model 12 pan brake Operator Manual	N/A			DMS Owned
	Surface Grinder	Harig Super 612 Hand Feed Surface Grinder Manual	208V 3ph	?	Yes	DMS Owned
	Hardness Tester	Clark Industries MC-12 Rockwell Tester Dial reading instructions Abbreviated Instructions for similar machine Instruction Manual for similar machine			Yes	DMS Owned
	Optical Comparator	Jones & Lamson PC-14A Specs	115V 1ph	7A	Yes	DMS Owned
	Surface Plate	4 foot granite surface plate; used for precise measurement and inspection	N/A			DMS Owned

Plastics & Composites

Plastics leverages Woodshop training for general-purpose tools. Woodshop training for comparable saws, sanders and manual routers is sufficient for Plastics training.

* Routers & Mills
* Shaping and Forming
* Saws
* Material Removal
* Drill Presses
* Other Tools

Routers & Mills

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Shapeoko 3 XXL CNC Router	33" x 33" x 3" Plastics and non-ferrous metals NO OIL	110V	?	Yes	DMS Owned
	Carbide 3D Nomad 883 Desktop CNC mill	8" x 8" x 3" 2000-10,000 RPM Tech details Manuals and Resources Plastics and non-ferrous metals NO OIL	110V	2A	Yes	DMS Owned
	Table Router	Rockler router table Porter cable motor - model 8902 120V, 12A, 60Hz 10000-23000/min (RPM)	120V	12A	Yes Woodshop	DMS Owned

Shaping and Forming

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Formech 508FS Vacuum Former	(19" x 17") Tech specs Formech Vacuforming Guide	220	20A	Yes	DMS Owned
	Quincy Labs 23-160 Acrylic Bender	Model number: 23-160 Serial Number: ST2-000357 375W, 3.25A, 115V, 60HZ	115V	3.25A	No	DMS Owned

Saws

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Laguna Bandsaw Laguna 14 Twelve-175 14" Band saw w/ 115" blade	1-3/4HP Specs Manual Blade installation and tensioning videos	115/230 Prewired 115	?	Yes Woodshop	DMS Owned
	Dewalt DWE7480, Type 1 10" Table Saw	Manual 120V, 15A, 60Hz 4800/min (RPM)	120V	15A	Yes Woodshop	DMS Owned

Material Removal

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Rigid EB44242 Multi-Sander	Manual 120V, 5A, 60Hz, 3/4 HP	120V	5A	No	DMS Owned
	Spindle Sander Jet JBOS-5	Stock number:708404 Manual 1/2 HP	115V	7.5A	No	DMS Owned
	Belt/Disc Sander Palmgren Model 9681061	Plastics/soft metals only BYOB: User provides own belt/disc 2x42 belt / 6" disc 1/3 HP Manual	115V	3.5A	Yes Woodshop	DMS Owned

Drill Presses

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	WEN 4214 Jeweling Drill Press (Jeweling and plastics only)	Manual 120V, 60Hz, 2/3HP 580-3200 RPMS 12-Inch Variable Speed Drill Press with laser centering device	120V	?	No	DMS Owned (2017)

Other Tools

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Delta 50-850 Dust Collector	Delta Single Stage Dust Collector Manual Model Number: 50-850 Serial Number: 115/230V, 12/6A, 60Hz, 1 or 3 PH wiring 1.5HP, 3450RPM	115V	12A	No	DMS Owned

Metal Shop

[top]

Metal Shop Camera

See also Blacksmith Committee and Machine Shop listings for complementary tools.

* Joining
* Cutting
* Material Removal
* Shaping incl. Sheet Metal
* Powder Coating

Joining

[top]

Picture	Tool	Manufacturer/Model	Svc Volts	Power	Class Required	Donated/Loaned by
	Welder (TIG/Stick)	Miller Syncrowave 351	220	Service limited to ~160 Amps at present	Yes	Owned by DMS
<	Welder (MIG)	Miller Millermatic 252	220	250 A @ 40% DC, 28VDC	Yes	Owned by DMS
	Welder (Spot)	Chicago Electric 61206	220	2.5kVA @ 50% DC	Yes	Loan (need name)
	Welder (MIG/Flux core)	Hobart Handler 210	115/230		Yes	Owned by DMS (Donated by Mike Churchill)

Cutting

[top]

Picture	Tool	Manufacturer/Model	Svc Volts	Power	Class Required	Donated/Loaned by
	CNC Plasma Cutter --------------- Bring your own Consumables	Dynatorch Super B with Hypertherm Powermax 85 4' x 8' table Dynatorch manual Hypertherm Reference guide SheetCAM Manual	220		Yes	Owned by DMS
	Handheld Plasma Cutter --------------- Bring your own Consumables	Cutmaster 42	230V/120V	15A/29A	Yes	Donated 2024
	Horizontal Bandsaw	Wellsaw Model 8 Operating Manual Parts List			No	Owned by DMS

Material Removal

[top]

Picture	Tool	Manufacturer/Model	Svc Volts	Power	Class Required	Donated/Loaned by
	Belt Grinder (DRY) w/ dust collector	Burr King 960-250 3HP motor, 8000 sfpm belt w/ 1HP BK-75 Dust Collector 2-2.5×60 belts Instruction Manual Belt Grinder Schematic Dust Collector Manual	208V 3ph		Yes	Loan (Randy Lisbona)
	4-1/2" Angle Grinder		110		No
	Bench Grinder	Porter-cable	150	15A	Yes - all bench grinders (Machine-side quiz)	Loan (Greg Needel)
	Wet-blasting Cabinet (NOT for greasy parts)	Vapor Honing Technologies VH-800P Specifications Manufacturer's video How-to video	110		No	DMS Purchased, 5/18

Shaping

[top]

Picture	Tool	Manufacturer/Model	Svc Volts	Power	Class Required	Donated/Loaned by
	Magnetic Pan and Box Brake	Baileigh Pan and Box Brake, Model BB-4816M User Manual	220V	220V (±5%), 1ph, 60hz, 12A	No	Owned by DMS
	Power Shear	Pexto Model 10-U-4 Power shear 4' x 10gauge 10ga mild steel	208V 3ph	--	Yes	Owned by DMS
	Ironworker punch/shear	GEKA 55/AD 5-station two-cylinder (punch, angle shear, flat shear, notching, bar cutting) [Manual] [Specs]	220V	50A	Yes	Owned by DMS
	Corner Notcher	intentionally blank	arbor press	UNK	No	Owned by DMS
	Slip Roller	Klutch User Manual	Manual	Manual	No	Owned by DMS
	Trike-style Tubing Bender	Tim Bene Built	Pneumatic		Yes	On Loan from Tim Bene (9/8/2018)
	Press Brake	SWAG Offroad?	arbor press	UNK	No	Owned by DMS
	Diacro Bender	Diacro model #2 #2 Bender Manual Capacity Chart The Art of Bending Manual	N/A		No but ask for help if you need it. Please do not bend Rebar it will destroy the tooling. We could make tooling for Rebar if this is needed.	On Loan from Randy Lisbona (7/1/2021)

Powder Coat

[top]

Picture	Tool	Manufacturer/Model	Svc Volts	Power	Class Required	Donated/Loaned by
	Powder Coat Oven	Davenport Electric Batch Oven APPROX. 3' x 3' x 8'	240V	13A	Yes
	Powder Coat Gun	SpectraCoat ES-02	110V		Yes
	Powder Application Booth with rolling rack	For Electrostatically applying powder (NO PAINT)	110V		Yes

Multipurpose Room

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	i3 Desktop	Acer	110		No	Stan Simmons (Loan, General Use)
	Core2Quad Desktop	HP	110		No	Stan Simmons (Loan, Signups & Resets)

Science

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Microscope		110		No
	Ultrasonic Cleaner				No
	Autoclave				Yes
	Biosafety Hood				Yes
	Fume Hood				Yes
	Additional Science Committee equipment

Server Room

[top]

• Space in the Server Room is available for racked servers ONLY (towers are not permitted).
• Please email [email protected] if you wish to host a server at DMS.
• Please note this is only available for servers that have an educational purpose (directly contributes to a committee or class series).
• Access to the Server Room is reserved for members of the Board of Directors and anyone else deemed necessary with a valid business justification. This means it's possible you may not have 24/7 physical access to your server.

Name	Purpose	N/A	Req'd Space	Manufacturer	Voltage	Owned/Leased	Classification
vmh-07	Virtualization Node	N/A	4U	Supermicro	208V	Owned	Infrastructure
prwcam01	BlueIris Server	N/A	2U	Dell	208V	Owned	Infrastructure
prwcam02	BlueIris Server	N/A	2U	Dell	208V	Owned	Infrastructure
prlxfil01	Member FileServer	N/A	2U+2U	Dell	208V	Owned	Infrastructure
prlxfil02	Member FileServer	N/A	2U+2U	Dell	208V	Owned	Infrastructure
files	Member FileServer	N/A	Tower	Custom	208V	Owned	Infrastructure

Picture	Tool	Manufacturer/Model	110/220	Comments	Class Required	Donated/Loaned by
	Color printer/copier/scanner (adjacent to Server room)	Canon 3525i User Guide Specs	110V	12A	No	Lease service

Woodshop

[top]

Woodshop Camera

Woodshop Tools as listed on Source/Confluence

Woodshop power tools require taking the sequence of introductory classes Woodshop 1, 2, 3 and 4 before use. When the DMS Expansion is complete, all power tools will be accessed via RFID interlocks [interlocks are in process]. Lathes and the MultiCam CNC Router require additional training. Woodshop classes are taught regularly, see the DMS Events Calendar for class listings.

* Routers
* Saws
* Material Removal
* Lathes
* Miscellaneous

Routers (incl. CNC)

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	MultiCam CNC Router V2.0 Current Information	MultiCam Classic - Modified machine table	208 3-Phase	80A	CAM + X-Carve + Machine proficiency	Owned by DMS 11/2014
	MultiCam CNC Router V1.0 Deprecated Information	MultiCam Classic	208 3-Phase	80A	Basic CNC Router Class + passing a user proficiency test	Owned by DMS 11/2014
	Medium CNC Router	X-Carve Approx. 500mm x 500mm working space	110V	~5A	Yes	Donated 2023
	Router Table	Porter Cable 3.25hp router Incra Mast-R-Lift II lift table Benchdog cast iron table and stainless cabinet INCRA Router Table	110	20A	Yes	Owned by DMS
	Slab mill	Slab mill for flattening large slabs, panels or end grain ~36" x 72" working area	110V		Yes	Owned by DMS

Saws

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Table Saw Qty 2	Saw Stop Table Saw SawStop ICS73230-52	230V 3 phase	17.8A	Woodshop Safety & Orientation	Owned byDMS
	Sliding Compound Miter Saw	Festool KS 120 EB	110V	13A	Woodshop Safety & Orientation	Owned by DMS
	Bandsaw	Laguna MODEL LT18 SE S#:K4061031 (Made in Italy) Operating Manual	220V		Bandsaw class	Loaned by Jimmy Arledge
	Bandsaw	Laguna MODEL 14BX Operating Manual	220V		Bandsaw class	Purchased by DMS 6-2023
	Bandsaw (Two Available)	Jet 14" MODEL JWBS-14SFX S#: 2018121562 & ___ Operating Manual	110V		Woodshop Safety & Orientation	Owned by DMS
	Scroll Saw	Excalibur EX-21 Operator Manual User provides blades: 5" unpinned saw blades	110V	1.3A	No	Owned by DMS
	Tracksaw	Festool TS 55 REQ Instruction Manual	120V	10A	No	Owned by DMS

Material Removal (includes sanders)

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Jointer	Powermatic 12" Jointer Powermatic 1285	230	30A	Woodshop Safety & Orientation	Owned by DMS 11/2014
	Planer	Powermatic 209HH Instruction Manual	230V	28A	Woodshop Safety & Orientation	Owned by DMS
	Drum Sander (Surface sander) Deprecated Being replaced	Powermatic PM2244 Manual for Drum Sander How-to incl changing sandpaper	115V	12A	Woodshop Safety & Orientation	Owned by DMS
	Spindle Sander (Surface sander)	Jet Joss-S Floor Spindle Sander Manual	115V	12A	Woodshop Safety & Orientation	Owned by DMS
	Belt sander/disc grinder (Surface sander)	Jet Belt Sander/Disc Grinder, model JSG-6DC Manual Replacement Switch Link	115V	12A	Woodshop Safety & Orientation	Owned by DMS
	Edge Sander	Jet OES-80CS Operating Instructions			Woodshop Safety & Orientation	Owned by DMS
	Random Orbital Sander	Festool ETS 150/3 EQ Instruction Manual	120V	2.6A	Woodshop ?	Owned by DMS
	Orbital Finish Sander	Festool DTS 400 EQ Instruction Manual	120V	1.67A	Woodshop ?	Owned by DMS

Lathes

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Jet lathes 12.5" swing over bed	Model 1221VS quantity 3 Specifications Operating Instructions and Parts List	110	8A	Woodshop Lathe Basics	Owned by DMS
	OneWay Lathe, 24" swing over bed	Model 2436 Specifications	220V 1ph		Woodshop Lathe Basics	Loaned by Jimmy Arledge
	Powermatic Lathe, 20" swing over bed	Model 3520B http://content.powermatic.com/assets/manuals/1352001_man_EN.pdf	220V	8A	Woodshop Lathe Basics	Owned by DMS

Miscellaneous

[top]

Picture	Tool	Manufacturer/Model	110/220	Power	Class Required	Donated/Loaned by
	Dust Extractor	Manual Felder RL350 Manufacturer's Website Video on How to Empty Dust Bins	230V 3ph	?A-?A	Woodshop	Owned by DMS
	Loose Tenon Joiner	Festool Domino XL DF 700	120V	6.5A	Woodshop ?	Owned by DMS
	Dust Extractor	Festool CT 36 E Instruction Manual	120V	2.9A-10.0A	Woodshop ?	Owned by DMS
	Drill Press	Powermatic Model PM2800B Instruction Manual			Woodshop 4	Owned by DMS
	Bench Grinder (for Tool Sharpening)	Rikon Model 80-805 Parts List Replacement parts	115	Unknown	No	Unknown