Powermatic 1285
A jointer is used to true a face of a board. A jointer alone cannot be used to make a board of even thickness. For this task, a thickness planer is used. Training is required in order to use this machine. NO ENDGRAIN ON THIS MACHINE.
Manufacturer's Specifications
| Powermatic Model 1285 12" Jointer | |
|---|---|
| Number of Knives | 44 |
| Standard Knife Size (L x W x T) (In.) | 30 x 12 x 2 |
| Cutterhead Speed (RPM) | 5,000 |
| Cutting Capacity (W x D) (In.) | 11-3/4 x 3/4 |
| Table Size (L x W) (In.) | 84 x 12 |
| Table Height from Floor (In.) | 31-1/2 |
| Fence Size (L x H) (In.) | 47 x 5-1/2 |
| Fence Tilt (Deg.) | 45 Forward, 45 Backward |
| Fence Positive Stops (Deg.) | 45, 90, -45 |
| Dust Collection Minimum CFM Required (CFM) | 800 |
| Dust Port Outside Diameter (In.) | 6 |
| Motor Power (HP) | 3 |
| Motor Phase | 1 |
| Motor Voltage (V.) | 230 |
The OEM manual can be found here: http://content.powermatic.com/assets/manuals/1791241_man_EN.pdf
Materials
Only wood may be used with the machine. NO ENDGRAIN ON THIS MACHINE.
Training
Training is required to use this tool.
