File:Multicam torque wrench 4.jpeg

From Dallas Makerspace
Jump to: navigation, search
Original file ‎(2,667 × 1,500 pixels, file size: 822 KB, MIME type: image/jpeg)

Multicam Torque wrench instructions step 4.

  • Use torque wrench to turn shaft clockwise until wrench "gives" or "snaps" at the pre-set value of 25 Ft-Lbs.

(Clockwise as viewed from top)

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current08:49, 3 April 2019Thumbnail for version as of 08:49, 3 April 20192,667 × 1,500 (822 KB)Chrismini (talk | contribs)Multicam Torque wrench instructions step 4. * Use torque wrench to turn shaft clockwise until wrench "gives" or "snaps" at the pre-set value of 25 Ft-Lbs. (Clockwise as viewed from top)
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Width2,667 px
Height1,500 px
Bits per component
  • 8
  • 8
  • 8
Pixel compositionRGB
OrientationNormal
Number of components3
Horizontal resolution72 dpi
Vertical resolution72 dpi
Software usedAdobe Photoshop CS6 (Macintosh)
File change date and time09:39, 3 April 2019
Exif version2.21
Color spaceUncalibrated
Unique ID of original documentE73C3003255C540F04F180393FCB1ACC
Date and time of digitizing04:25, 3 April 2019
Date metadata was last modified04:39, 3 April 2019
Retrieved from "https://wiki.dallasmakerspace.org/w/index.php?title=File:Multicam_torque_wrench_4.jpeg&oldid=28529"